The Klipsch CDT-3650-C II maintains the core technology use of a rigid 1” Aluminum compression driver (tweeter) mated to an exclusive Tractrix® Horn combined with a 6.5” IMG woofer in a 2-way design. Now with a new low-profile, more elegant grille and refinements to both high frequency and low frequency reproduction, it continues as a high-performance choice for everything from 2-channel music playback to full, large room surround sound use.
With an all new grille, the visible frame size is reduced by 90% and grill depth is reduced by 80% over the previous design, for a more edge-to-edge consistent look that blends in with the wall more attractively. The new aluminum, paintable, magnetic grille attaches tightly and securely with ease to virtually eliminate resonant distortion.
Klipsch horn-loaded technology increases acoustic output while significantly reducing distortion. Proprietary Controlled Dispersion Technology allows for both the symmetrical, 100° Tractrix Horn compression driver (tweeter) and woofer to be independently aimed toward the main listening area. The tweeter swivels while the woofer rotates 360° and pivots 15° in any direction. The precisely controlled dispersion of the horn-loaded tweeter assures that high frequencies are more effectively directed towards the listening area than typical amiable, broad dispersion, standard dome tweeters. This, combined with the woofer’s ability to also direct more narrowly dispersed midbass frequencies, yields overall sound with more lifelike impact, greater detail and better vocal clarity.
Combined with the Tractrix Horn, the one-inch stiff, yet lightweight, metallic diaphragm works in conjunction with a precise phasing plug at the horn throat to create a very efficient driver with excellent transient response and lack of distortion. The new Linear Travel Suspension assures the most precise diaphragm excursion, increasing high-frequency detail and smoothness.
The solid Injection Molded Graphite woofer cone has been strengthened for even more accurate bass reproduction.
For reduction of high frequency output in challenging install applications such as overly reflective rooms, allowing for a better frequency balance.
Provide even pressure against drywall for long-term installation reliability.
For increased mounting flexibility and pre-install marking during new construction.
For meeting building codes and/or reduction of transferred sound between rooms.
|Frequency Response||63Hz-23KHz ± 3dB|
|Sensitivity||93dB @ 2.83V / 1m|
|Nominal Impedance||8 Ohms compatible|
|Power Handling||50W RMS / 200W Peak|
|Recommended Amplifier Power||100 W|
|High Frequency Driver||1” (2.54cm) Aluminum diaphragm compression drivermated to a swiveling 100° round Tractrix® Horn|
|Low Frequency Driver||6.5" (16.51cm) pivoting IMG cone woofer|
|Enclosure Material/Type||ABS/Infinite baffle, front flush with wall|
|Wire Gauage Accommodated||12 ga|
|Mounting Depth||4.5" (13.72cm)|
|Finish||White paintable frame and grille|
|Installation Kit||IK-650-C (sold separately)|
|Fire Rated Enclosure||ME-650-C (sold separately)|
|Maximum Power Handling (Watts)||200|
|Number of Speakers||1|