Classic Stereo and Video
Crestron® Wireless In-Ceiling Dimmer with universal dimming and built-in support
|Product Weight (lbs.)||0.42|
Compact in-ceiling universal dimmer, equipped with remote input port for control via standard light switches. Wireless infiNET EX™ technology connects the CLCI to a Crestron control system for complete lighting control.
The CLCI-DIMUEX-W is a universal dimmer capable of dimming 230 VAC lighting loads. Its ultra-slim design allows it to be installed in the ceiling, next to or near the fixture. Powered by infiNET EX™ technology, the CLCI device communicates wirelessly with the Crestron control system, making it perfect for both new and retrofit applications. Best of all, the CLCI installs inline without requiring any special wiring and can be controlled via a standard light switch.
The CLCI-DIMUEX-W supports dimming incandescent, tungsten-halogen, magnetic low voltage, electronic low voltage and dimmable CFL loads. Load detection circuitry automatically determines forward- or reverse-phase dimming mode. Two sets of screw terminals enable easy wiring to more than one load of up to 300 W/VA.
Feeding each CLCI is a set of terminals used to power the unit. A second set of high-voltage terminals wired in parallel allow for a fast, clean installation when deploying multiple CLCI units. No need for wire connectors or extra gang boxes; just "daisy chain" multiple CLCIs together. In certain retrofit applications, this lets you create more zones from what was originally wired.
The CLCI provides built-in support for load control via a maintained or momentary switch. Applications that require basic on/off control will benefit by using a typical cost-effective switch. A momentary push-button type switch can be used for cost-effective dimming control; tapping turns the connected loads on and off, while holding the button dims the loads up or down.
Because it's connected to the Crestron system, the CLCI can also be controlled from any keypad, touch panel, remote, or mobile device. Tie in occupancy sensors and photocells together with Crestron RoomView® software for a complete solution to effectively manage energy.
Setup is simple, especially when using a connected maintained or momentary switch. A specific series of button presses initiates the wireless device acquire mode, so there's no need to climb a ladder to join the device to the infiNET EX network.
Built on steadfast infiNET™ technology, infiNET EX is the new standard in 2-way wireless connectivity. So robust, infiNET EX can handle installations in even the most urban settings. The redundant nature of its mesh networking technology means that a command will never be missed, resulting in faultless operation - something that is of the utmost importance when it comes to lighting control and building automation. The CLCI-DIMUEX-W harnesses this cutting edge wireless connectivity which affords it a level of robustness and dependability above other solutions.
Compact universal dimmer deploys easily in new or retrofit applications
Allows Crestron control of any lighting fixture
No special wiring—installs inline at the fixture
Maximum 300 W/VA load capacity
Reliable wireless communication using infiNET EX™ mesh networktechnology
Local controls for testing and maintenance
Built-in support for control via standard momentary or maintained switch
Setup via on-board button or connected switch
Daisy-chain units for easy deployment
Operates across voltage range of 220-240 VAC
|Product Weight (lbs.)||0.42|